A8 Dash Cam Firmware Update

A8 Dash Camera – Loop Recording Firmware Update

The purpose of this update is to fix any bugs you may have had with the A8 loop recording. If you have not had any issues, the update will not cause any problems with the camera.

PLEASE FOLLOW THE INSTRUCTIONS BELOW EXACTLY. IF YOU MISS A STEP YOUR UPDATE MAY NOT WORK.

Update Instructions:

A8-Firmware-Update1 Download the firmware update by clicking the Download link below, unzip and save the two files to your computer

2 Take the SD (memory) card out of your camera and format it

3 Copy and paste the files from your computer onto the SD card

4 Insert the card into A8 camera and turn the camera on (I plug mine into a Powerbank)

5 When you see the picture on the screen as shown in adjacent photo, press the OK Button (Play Button on top of the cam)

6 Approximately 1 minute later the camera will shut down, that is the update finished

7 Remove the SD card and re-format it in your computer (if you don’t re-format, each time you insert the card into your cam the firmware update process will occur)

8 Insert the freshly formatted card into your camera and start normal recording.